Bespoke joinery for office fit-outs, including reception areas, wall panelling, meeting spaces, tea points and washrooms. Manufactured in the West Midlands, with project requirements reviewed individually.
Low level panelling painted to a Farrow & Ball colour, with a moulded cap rail running continuously around the room. Panel widths were set out to align with door openings and window reveals so the joinery reads as part of the architecture rather than an addition to it.
Low level panelling extended to wrap structural columns, forming a continuous dado that ties the room together. Each column was templated on site and the cladding machined in the workshop so the mitred corners close tightly around the steel substructure.
Low level panelling carried up the stair flight with raking frames cut to follow the pitch of the stairs. The moulded cap rail and handrail run in one continuous line, scribed to the wall at each landing return.
Stairwells panelled to a high level, with raking frames set out to follow the flight and integrated wall lighting. The panel joints land on the tread nosings so the pattern reads correctly from every angle of the stairwell.
Full-height panelling to the circulation corridor, set out so panel widths align with doorways and light fittings. The panels are detailed with a stepped moulded profile that gives depth without overpowering the architecture.
High level panelling incorporating bespoke units, with concealed storage, drawer banks and open display shelving built into the wall line. The unit fronts sit flush with the panelling so they disappear until they are opened.
High level panelling with bespoke door sets, matching frames, linings and ironmongery, detailed so the doors read as part of the panelling. Fire-performance requirements are confirmed against the project specification and supporting documentation before manufacture.
The bespoke moulding profile used throughout the Mayfair fit-out — a multi-step profile machined as a single section in our workshop and mitred on site. The same moulding runs across panelling heads, door architraves and cornice.
Fluted upholstered banquette seating built into a recess, with a concealed LED shadow gap and a solid oak plinth lifting the seat off the floor. The run finishes against full-height oak veneer storage, book-matched so the grain carries across every door.
Symmetrical tea point run with six base units in light oak veneer, glass-fronted wall cabinets and a white quartz worktop with matching upstand. Power and data are trunked cleanly into the splashback.
Tea point fitted with a bold-veined white quartz work surface and full-height quartz splashback, warm under-cabinet LED, a tall end cabinet, a three-drawer stack and integrated instant hot water behind removable access panels.
Reception desk in American Black Walnut veneer with a green smoke painted body and concealed storage.
Illuminated reception desk combining stone facings with fine veneer panels and a wrapped return.
Coffee station in American Black Walnut with solid surface worktop, integrated services and appliance housing. The tall end panel doubles as a visual screen from the adjacent circulation.
Structural columns clad in birch plywood with precision-machined shadow gaps.
Reception area wall clad in plywood, scribed to site and finished on site.
Bespoke staircase with hardwood treads, painted strings and a slender balustrade.
Full washroom refurbishment with cubicles, IPS panelling and solid surface vanities.
Office tea point with full-height storage, appliance housings and a durable worktop. Services are trunked through the carcase with removable access panels for maintenance.
Send us your drawings, specifications or tender package and tell us what you need.
Indicative only. Final quotation subject to drawings, specification and/or site survey.